A light appears in the dark
Product.Nr. 20610
€ 6,40*
2 pieces / package
Dimensions:
Ø 6 mm, L= 30 mm
to article
Incandescent lamps, candle-shaped
Product.Nr. 21015
€ 6,80*
12 Volt, 50 mA
to article
Light bulbs in spherical shape
Product.Nr. 21030
€ 4,80*
12 V, 60 mA
Smal and fine detail:
Incandescent lamps with sockets and connecting cables can be found as a set under item no. 21040.
to article
Spare light soffitten for #21860
Product.Nr. 21060
€ 4,80*
2 pieces
Currently not available.
to article
Product.Nr. 21090
€ 5,40*
1 set (2 pieces) without candleholder and cable.
Spare lamps for the flickering fire #20190
to article
Lamp canopy with thread for MinLux lamps
Product.Nr. 21900
€ 3,90*
Hint:
The lamp canopy is equipped with a screw thread, which lets the chandeliers be easily attached to our stucco rosettes (22410, 22420, 70080, 70090).
Small and intricate detail:
The pictured rosettes and the chain are not included.
Procedure for replacing the lamp canopy:
To do this, simply bend open the upper ring of the chain and replace the original canopy of the MiniLux lamps with the threaded canopy.
to article
Product.Nr. 22010
€ 10,80*
4 pieces
Photo shows Item No. 22010, 22030, 22050
to article
Product.Nr. 22030
€ 8,50*
2 pieces
Photo shows Item No. 22010, 22030, 22050
to article
Product.Nr. 22050
€ 6,60*
6 pieces / pack
Photo shows item No. 22010, 22030, 22050
Hint:
Connecting the lamp cables to the miniature plug is as simple as can be: you feed the lamp cable from behind through the small hole in the plug, carefully remove a piece of insulation from each of the two wires and then wrap the exposed copper wire around one of the plug contact pins in each case; this directly at the beginning of the pins.
to article
Microfuses, 3.15 A, for #22150/300
Product.Nr. 22110
€ 3,20*
€ 0,64 pro piece
to article
12-socket strip with fuse and switch
Product.Nr. 22120
€ 18,50*
cable 2.5 m
to article
Product.Nr. 22130
€ 3,20*
to article
6--socket strip with fuse and switch
Product.Nr. 22160
€ 13,50*
cable 2.5 m
to article
Product.Nr. 22200
€ 4,25*
€ 0,85 pro metre
2-wire, black-white
cross-section: 0.14 mm²
Dimensions:
to article
Lamp cables with ring connections
Product.Nr. 22215
€ 3,50*
€ 1,17 pro metre
to article
Product.Nr. 22220
€ 8,20*
€ 4,10 pro metre
Dimensions:
Outer diameter: 3.5 mm
Inner diameter: 2.2 mm
Length: 500 mm
5 pieces / package
to article
Product.Nr. 22230
€ 2,50*
€ 1,25 pro metre
to article
Product.Nr. 22250
€ 19,90*
€ 0,60 pro metre
witdh: 4,76 mm
length: 33 Meter
to article
Product.Nr. 22300
€ 29,80*
Special connection terminals can be used to connect 6 indirect lighting bars #20600 (2 x 250 mA) or up to 60 lamp bulbs (each 50 mA).
11.0 x 6. x 2.0 cm (LxWxH)
to article
Product.Nr. 22410
€ 9,80*
For lamps of the MiniLux series the canopy with thread (#21900) is additionally required.
Dimensions:
Ø 50 mm
to article
Product.Nr. 22420
€ 9,80*
For lamps of the MiniLux series the canopy with thread (#21900) is additionally required.
Dimensions:
Ø 62 mm
to article
Product.Nr. 22510
€ 64,50*
Safety transformer,
manufactured in Germany, in accordance with DIN EN61558-2-6.
For use in dry rooms only.
Transformer is completely moulded into the plastic housing.
Protected on the input side by a current-sensitive temperature switch 110°C, with self-holding function (combined protection against overtemperature and overcurrent).
Connected loads:
Primary: 230 V~, 50/60 Hz
Secondary: 12 V~ / 5.17 A
Power: 60 VA, with overtemperature switch
Connection:
Input:
Flat cable 2x 0.75mm², 1.40 m long, with Euro flat plug.
Output:
Round cable 2x 1.5mm², white, 0.5 m long, ends stripped.
Dimensions (WxHxD):
100 x 70 x 60 mm
Weight: 1.5 kg
Note:
The transformer is suitable for max. 80 light bulbs or 8 soffit strips (indirect lighting # 20600 = 2 soffit strips / pack).
For larger loads, we recommend our transformer 105 VA, 8.9 A (item no. 22520).
If the transformer overheats (overloads), the built-in thermal switch briefly switches the transformer off to protect the system.
IMPORTANT: The temperature switch does NOT reset itself after a fault. This is for safety reasons to prevent unintentional restarting. To reset the built-in temperature switch, the transformer must be completely disconnected from the power supply for a few minutes.
to article
Fast Order [more]
Complete set – Biedermeier room, incl. accessories
Product.Nr. 40500
€ 158,00 -15% RRP € 185,90 *
Complete set – Biedermeier dining room, incl. accessories
Product.Nr. 40400
€ 158,00 -15% RRP € 185,90 *
Complete set – Biedermeier room, incl. accessories
Product.Nr. 40500
€ 158,00 -15% RRP € 185,90 *
